An integrated functional approach to dissect systemic responses in maize to arbuscular mycorrhizal symbiosis.

Most terrestrial plants benefit from the symbiosis with arbuscular mycorrhizal fungi (AMF) mainly under nutrient-limited conditions. Here the crop plant Zea mays was grown with and without AMF in a bi-compartmented system separating plant and phosphate (Pi) source by a hyphae-permeable membrane. Thus, Pi was preferentially taken up via the mycorrhizal Pi uptake pathway while other nutrients were ubiquitously available. To study systemic effects of mycorrhizal Pi uptake on leaf status, leaves of these plants that display an increased biomass in the presence of AMF were subjected to simultaneous ionomic, transcriptomic and metabolomic analyses. We observed robust changes of the leaf elemental composition, that is, increase of P, S and Zn and decrease of Mn, Co and Li concentration in mycorrhizal plants. Although changes in anthocyanin and lipid metabolism point to an improved P status, a global increase in C versus N metabolism highlights the redistribution of metabolic pools including carbohydrates and amino acids. Strikingly, an induction of systemic defence gene expression and concomitant accumulation of secondary metabolites such as the terpenoids alpha- and beta-amyrin suggest priming of mycorrhizal maize leaves as a mycorrhiza-specific response. This work emphasizes the importance of AM symbiosis for the physiological status of plant leaves and could lead to strategies for optimized breeding of crop species with high growth potential.

Mycorrhizal phosphate uptake pathway in maize: vital for growth and cob development on nutrient poor agricultural and greenhouse soils.

Arbuscular mycorrhizal fungi (AMF) form a mutually beneficial symbiosis with plant roots providing predominantly phosphorus in the form of orthophosphate (Pi) in exchange for plant carbohydrates on low P soils. The goal of this work was to generate molecular-genetic evidence in support of a major impact of the mycorrhizal Pi uptake (MPU) pathway on the productivity of the major crop plant maize under field and controlled conditions. Here we show, that a loss-of-function mutation in the mycorrhiza-specific Pi transporter gene Pht1;6 correlates with a dramatic reduction of above-ground biomass and cob production in agro-ecosystems with low P soils. In parallel mutant pht1;6 plants exhibited an altered fingerprint of chemical elements in shoots dependent on soil P availability. In controlled environments mycorrhiza development was impaired in mutant plants when grown alone. The presence of neighboring mycorrhizal nurse plants enhanced the reduced mycorrhiza formation in pht1;6 roots. Uptake of (33)P-labeled orthophosphate via the MPU pathway was strongly impaired in colonized mutant plants. Moreover, repression of the MPU pathway resulted in a redirection of Pi to neighboring plants. In line with previous results, our data highlight the relevance of the MPU pathway in Pi allocation within plant communities and in particular the role of Pht1;6 for the establishment of symbiotic Pi uptake and for maize productivity and nutritional value in low-input agricultural systems. In a first attempt to identify cellular pathways which are affected by Pht1;6 activity, gene expression profiling via RNA-Seq was performed and revealed a set of maize genes involved in cellular signaling which exhibited differential regulation in mycorrhizal pht1;6 and control plants. The RNA data provided support for the hypothesis that fungal supply of Pi and/or Pi transport across Pht1;6 affects cell wall biosynthesis and hormone metabolism in colonized root cells.

Isotope ratio measurements with a fully simultaneous Mattauch-Herzog ICP-MS.

A fully simultaneous ICP-MS, based on a compact Mattauch-Herzog geometry with a permanent magnet and a large, spatially resolving semiconductor ion detector covering the complete inorganic relevant mass range from (6)Li to (238)U in a single measurement, has been used to determine isotope ratios and assess achievable isotope ratio precisions. Measurements of the (235/238)U isotopic ratio, chosen as example for an isotopic system with a disparate isotope ratio, yielded a precision of 0.05 % relative. To evaluate the expected multi-isotope ratio measurement capabilities of the system used, several isotope ratios spanning a wide range ((6/7)Li, (84/86)Sr, (87/86)Sr, (88/86)Sr, (204/207)Pb, (206/207)Pb and (208/207)Pb) were measured simultaneously, using a synthetic multi-element standard as sample. Very satisfying isotope ratio precisions, between 0.5 and 0.04 % relative, depending on the isotope ratio in question were found during the simultaneous multi-isotope ratio measurements. Together with a brief description of the system and measurement procedures employed for this technical note, the results achieved are assessed in view of other existing ICP-MS-based isotope ratio techniques.

The Influence of Cadmium Stress on the Content of Mineral Nutrients and Metal-Binding Proteins in Arabidopsis halleri.

We investigated the influence of cadmium stress on zinc hyperaccumulation, mineral nutrient uptake, and the content of metal-binding proteins in Arabidopsis halleri. The experiments were carried out using plants subjected to long-term cadmium exposure (40 days) in the concentrations of 45 and 225 µM Cd(2+). Inductively coupled plasma-mass spectrometry, size exclusion chromatography coupled with plasma-mass spectrometry, and laser ablation inductively coupled plasma-mass spectrometry used for ablation of polyacylamide gels were employed to assess the content of investigated elements in plants as well as to identify metal-binding proteins. We found that A. halleri is able to translocate cadmium to the aerial parts in high amounts (translocation index >1). We showed that Zn content in plants decreased significantly with the increase of cadmium content in the growth medium. Different positive and negative correlations between Cd content and mineral nutrients were evidenced by our study. We identified more than ten low-molecular-weight (<100 kDa) Cd-binding proteins in Cd-treated plants. These proteins are unlikely to be phytochelatins or metallothioneins. We hypothesize that low-molecular-weight Cd-binding proteins can be involved in cadmium resistance in A. halleri. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s11270-012-1292-4) contains supplementary material, which is available to authorized users.

Combined application of a laser ablation-ICP-MS assay for screening and ESI-FTICR-MS for identification of a Cd-binding protein in Spinacia oleracea L. after exposure to Cd.

We have studied the binding of the toxic element Cd to plant proteins and have used for this purpose spinach (Spinacia oleracea L.) plants treated with 50 µM Cd(II) as a model system. Laser ablation ICP-MS has been applied for the screening of Cd-binding proteins after separation by native anodal polyacrylamide gel electrophoresis (AN-PAGE) and electroblotting onto membranes. The main Cd-carrying protein band was isolated and investigated by nano-electrospray ionization-Fourier transform ion cyclotron resonance (FTICR) mass spectrometry after tryptic digestion. By this procedure, the main Cd-binding protein was identified as ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO). The latter enzyme has been discussed in the literature to be affected in its activity by oxidative stress induced by Cd. However, in this paper it is demonstrated for the first time that RuBisCO directly binds Cd and thus may be directly altered by this toxic element. A commercially available protein standard was used to verify direct binding of Cd(II) to the protein, even without metabolisation. The resulting metal-protein complex was shown to be stable enough to survive AN-PAGE separation and electroblotting. By the use of size exclusion chromatography coupled with ICP-MS it was demonstrated that the RuBisCO protein standard shows similar metal binding properties to Cd. Furthermore, essential elements such as Mn(II), Fe(II) and Cu(II), which are known to possibly replace the RuBisCO activator Mg(II), were investigated in addition to Zn(II). Again, similar binding properties in comparison to the plant protein were observed.

Certification of a new selenized yeast reference material (SELM-1) for methionine, selenomethinone and total selenium content and its use in an intercomparison exercise for quantifying these analytes.

A new selenized yeast reference material (SELM-1) produced by the Institute for National Measurement Standards, National Research Council of Canada (INMS, NRC) certified for total selenium (2,059+/-64 mg kg(-1)), methionine (Met, 5,758+/-277 mg kg(-1)) and selenomethionine (SeMet, 3,431+/-157 mg kg(-1)) content is described. The +/-value represents an expanded uncertainty with a coverage factor of 2. SeMet and Met amount contents were established following a methanesulfonic acid digestion of the yeast using GC-MS and LC-MS quantitation. Isotope dilution (ID) calibration was used for both compounds, using 13C-labelled SeMet and Met. Total Se was determined after complete microwave acid digestion based on ID ICP-MS using a 82Se spike or ICP-OES spectrometry using external calibration. An international intercomparison exercise was piloted by NRC to assess the state-of-the-art of measurement of selenomethione in SELM-1. Determination of total Se and methionine was also attempted. Seven laboratories submitted results (2 National Metrology Institutes (NMIs) and 5 university/government laboratories). For SeMet, ten independent mean values were generated. Various acid digestion and enzymatic procedures followed by LC ICP-MS, LC AFS or GC-MS quantitation were used. Four values were based on species-specific ID calibration, one on non-species-specific ID with the remainder using standard addition (SA) or external calibration (EC). For total selenium, laboratories employed various acid digestion procedures followed by ICP-MS, AFS or GC-MS quantitation. Four laboratories employed ID calibration, the remaining used SA or EC. A total of seven independent results were submitted. Results for methionine were reported by only three laboratories, all of which used various acid digestion protocols combined with determination by GC-MS and LC UV. The majority of participants submitted values within the certified range for SeMet and total Se, whereas the intercomparison was judged unsuccessful for Met because only two external laboratories provided values, both of which were outside the certified range.

Investigation of the recovery of selenomethionine from selenized yeast by two-dimensional LC-ICP MS.

Determination of selenomethionine in selenized yeast by HPLC-ICP MS has been revisited with the focus on recovery of this amino acid during the proteolytic digestion and chromatography steps. Recovery of the extracted selenium from an anion-exchange column was 100% but selenomethionine quantified by the method of standard additions accounted only for 67% of the selenium injected. Analysis (by size-exclusion LC-ICP MS) of the eluate collected before and after the selenomethionine peak showed the presence of oxidized selenomethionine (ca. 3%) and selenomethionine likely to be unspecifically associated with the biological matrix continuum (ca. 11%). This finding was validated by two-dimensional LC-ICP MS using a different elution order, i.e. size-exclusion anion-exchange. The approach developed enabled demonstration that more than 80% of selenium in the selenized yeast is actually present in the form of selenomethionine and suggests that many results reported elsewhere for the concentration of this vital amino acid in selenized yeast may be negatively biased. The research also provided insight into speciation of selenium in the solid residue after proteolytic extraction but the additional amount of selenomethionine recovered was negligible (<1.5%).

Identification of non-peptide species in selenized yeast by MALDI mass spectrometry using post-source decay and orthogonal Q-TOF detection.

The potential of tandem mass spectrometry following matrix-assisted laser desorption ionization (MALDI) was studied for speciation of selenium. Non-peptide selenium-containing compounds were isolated from a selenized yeast aqueous extract by size-exclusion chromatography. Post-source decay (PSD) was compared with orthogonal quadrupole collision cell dissociation for the purpose of obtaining fragmentation and structural information. In the PSD mode, the use of ion gate covering the whole isotopic cluster of the parent compound allowed the immediate recognition of fragments containing Se and those in which this element was absent. The tandem mass spectra obtained by orthogonal MALDI Q-TOF were equally informative in terms of the number of fragments but suffered from a poorer sensitivity. The mass accuracy was ca. 20 times better in the oMALDI configuration than in the PSD mode. An unknown selenium compound with an m/z 388 was detected with a mass accuracy of 3 ppm according to the proposed empiric formula.

Speciation of arsenic in chicken meat by anion-exchange liquid chromatography with inductively coupled plasma-mass spectrometry.

A method was developed for speciation analysis of arsenic in chicken meat. Different procedures were optimized for the recovery of arsenic compounds without destroying the original compounds, and 2 anion-exchange liquid chromatography columns were compared for the separation of arsenic species prior to on-line detection by inductively coupled plasma-mass spectrometry. The 2 species found were dimethylarsinic acid (106 +/- 5 ng/g) and arsenobetaine (37 +/- 4 ng/g). The stability of arsenic species in a chicken meat candidate reference material for at least 12 months was demonstrated.